Before Use; Charging The Battery Pack (See Fig . A) - Parkside PLG 20 A4 Mode D'emploi

WARNING!
■ To avoid potential risks, damaged mains cables should be
replaced by the manufacturer, their customer service depart-
ment or a similarly qualified person .

Before use

Charging the battery pack (see fig . A)

CAUTION!
► Always unplug the appliance before you remove the battery
pack from or connect the battery pack to the charger .
NOTE
► Never charge the battery pack at an ambient temperature of
below 10°C or above 40°C . If a lithium-ion battery is to be
stored for an extended period, the charge level should be
checked regularly . The optimum charge level is between 50%
and 80% . The storage climate should be cool and dry and the
ambient temperature should be between 0°C and 50°C .
♦ Connect the battery pack
(see fig . A) .
♦ Insert the power plug into the socket . The control LED
up red .
♦ The green control LED
complete and the battery pack
PLG 20 A4
to the high-speed battery charger
indicates that the charging process is
is ready .
lights
GB │ IE │ 7 ■