Qleaf´s Anatomy; Qleaf Module (A) - ExSilent Qleaf Mode D'emploi

Qleaf´s anatomy
A Qleaf - module (casing)
1 Battery compartment
2 Coloured side indicator
3 Microphone opening
4 Opening for battery removal
5 Speaker opening
B Soft tip
6 Sound opening
7 Domes
8 Pull cord
C Battery (type 10)
9 Plus pole (+)
10 Minus pole (–)
11 Battery removal tool
6
4
1
A
2
3
6
B
7
10
C
11
9
Qleaf module
Casing (A)
The casing has been made of durable plastic. For
the maintenance of the casing, please refer to the
5
chapter 'Maintenance and use' (page 14-15).
Battery compartment (1)
This compartment comprises of the battery - a
8
type 10 cell battery - that provides the power
supply for Qleaf. The device is switched off upon
the removal of the battery.
The battery contacts in the battery compartment
transport the supply voltage from the battery
to the microprocessor inside the device. The
battery contacts also serve as programming
contacts. Your dispenser uses the programming
contacts with a special tool to change the
settings of the Qleaf.
Coloured side indicator (2)
(A)
By using two diff erent colours, the left and right
ear module can be identifi ed.
Microphone opening (3)
Here the microphone is located that picks up the
sound, which is processed and amplifi ed by the
Qleaf.
Opening for battery removal (4)
The added battery removal tool is used through
this opening. See chapter 'Removing the battery'
(page 9).
Speaker opening (5)
The processed and amplifi ed sound emits
through this opening and is directed via the soft
tip towards the ear drum.
7