Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
-
Do not remove the side mechanisms from the shell.
-
Should any of the side mechanisms be malfunctioning or damaged, please refer to a Nolan authorized dealer.
VISOR ACCESSORIES
•
The visor comes complete with a number of assembled accessories which can be temporarily removed to facilitate routine
cleaning and maintenance operations.
1. VISOR ACCESSORY REMOVAL
1.1 Remove the visor from the helmet by following the specific instructions contained in this manual.
1.2 Unfasten the left-hand side cover from the visor by pushing out from the inside the three click-on fastening elements
(Fig. 6). Repeat the same operation for the right-hand side cover.
1.3 Remove the visor air intake by first unfastening the internal air diffuser (A) and then extracting the intake external part
(B) from the outlet provided in the visor (Fig. 7)
2. VISOR ACCESSORY ASSEMBLY
2.1 Fasten the left-hand side cover to the visor by pushing the 3 click-on fastening elements into their respective seats
(Fig. 6). Repeat the same operation for the right-hand side cover.
2.2 Place the intake external part (B) in the outlet provided in the visor and fasten the air intake (A) from the inside by
applying pressure to the two hooking and centring pins on the sides (Fig. 7).
2.3 Fit the visor on the helmet by following the specific instructions contained in this manual.
WARNING!!!
-
Ensure that the side covers have been correctly assembled. Open and close the visor making sure that the
covers are retained in their respective positions. Check that the air intake is securely fastened to the visor by
opening and closing the outer flap. If necessary, repeat the above-mentioned steps.
-
Never use the helmet without having correctly assembled all the visor accessories.
-
In case of malfunctioning or damages, please contact an authorised Nolan dealer.
• CHIN GUARD
1. CHIN GUARD RELEASE
1.1 Open the visor completely.
-
Do not remove the side mechanisms from the shell.
-
Should any of the side mechanisms be malfunctioning or damaged, please refer to a Nolan authorized dealer.
•
VISOR ACCESSORIES
The visor comes complete with a number of assembled accessories which can be temporarily removed to facilitate routine
cleaning and maintenance operations.
1. VISOR ACCESSORY REMOVAL
1.1 Remove the visor from the helmet by following the specific instructions contained in this manual.
1.2 Unfasten the left-hand side cover from the visor by pushing out from the inside the three click-on fastening elements
(Fig. 6). Repeat the same operation for the right-hand side cover.
1.3 Remove the visor air intake by first unfastening the internal air diffuser (A) and then extracting the intake external part
(B) from the outlet provided in the visor (Fig. 7)
2. VISOR ACCESSORY ASSEMBLY
2.1 Fasten the left-hand side cover to the visor by pushing the 3 click-on fastening elements into their respective seats
(Fig. 6). Repeat the same operation for the right-hand side cover.
2.2 Place the intake external part (B) in the outlet provided in the visor and fasten the air intake (A) from the inside by
applying pressure to the two hooking and centring pins on the sides (Fig. 7).
2.3 Fit the visor on the helmet by following the specific instructions contained in this manual.
WARNING!!!
-
Ensure that the side covers have been correctly assembled. Open and close the visor making sure that the
covers are retained in their respective positions. Check that the air intake is securely fastened to the visor by
opening and closing the outer flap. If necessary, repeat the above-mentioned steps.
-
Never use the helmet without having correctly assembled all the visor accessories.
-
In case of malfunctioning or damages, please contact an authorised Nolan dealer.
• CHIN GUARD
1. CHIN GUARD RELEASE
1.1 Open the visor completely.
5
5
Publicité
Table des Matières
