Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
• Fig. 36B the air intake is completely closed.
-
rear air extractors: they allow warm and stale air to flow out ensuring an optimum comfort inside the helmet (Fig. 37).
• N-COM ® - NOLAN COMMUNICATION SYSTEM PRE-SETTING
Your Nolan helmet is factory-preset to be equipped with the N-Com communication system.
During communication system installation (see the specific instructions contained in the N-Com kit) it will be necessary to
remove the foam material lower back rest from the helmet as shown in Fig. 38.
WARNING!!!
-
The foam material lower back rest should ONLY be removed if the helmet is used with an installed N-Com ®
compatible system.
• Fig. 36B the air intake is completely closed.
-
rear air extractors: they allow warm and stale air to flow out ensuring an optimum comfort inside the helmet (Fig. 37).
• N-COM ® - NOLAN COMMUNICATION SYSTEM PRE-SETTING
Your Nolan helmet is factory-preset to be equipped with the N-Com communication system.
During communication system installation (see the specific instructions contained in the N-Com kit) it will be necessary to
remove the foam material lower back rest from the helmet as shown in Fig. 38.
WARNING!!!
-
The foam material lower back rest should ONLY be removed if the helmet is used with an installed N-Com ®
compatible system.
16
16
Publicité
Table des Matières
