Fortress Building Products PURE VIEW Instructions D'installation page 36

Fig. 1
Clamp
Wood
2" x 4"
Step 2: Cut & Clean Rails
1. Cut rails using a saw with a ferrous metal cutting blade.
2. Use file to smooth cut edges.
3. Remove any metal shavings and dust with a brush or rag.
4. Make sure surfaces to be painted are clean.
Note:
• Be sure not to cut Grommets in rails.
Fig. 1
Step 3: Apply Spray Paint To Cut Areas
1. Using a piece of cardboard as a mask, apply the 1
Fortress zinc based touch-up paint.
2. Allow to dry before applying second coat.
3. Apply the 2nd coat of Fortress zinc based touch-up paint.
4. Allow to dry and install.
36
Clamp
Balusters
Clamp
Clamp
Fig. 2
PURE VIEW: Fe GLASS BALUSTER INSTALLATION
26
Fig. 2
Mark on rail
from back
of bracket
Fig. 3
Post To
Baluster
Space Must
Be Less
Than 4"
[101.5mm]
coat of
st