Technical Information; Technical Data; Safety Devices - ATT NUSSBAUM POWER LIFT HDL 6500 SST DG Manuel D'exploitation

3

Technical information

3.1

Technical data

Load carrying capacity:
HDL 6500 SST DG
HDL 7000 SST DG
HDL 8000 SST DG
Load distribution:
HDL 6500 SST DG
HDL 7000 SST DG
HDL 8000 SST DG
Lift time:
HDL 6500 SST DG
HDL 7000 SST DG
HDL 8000 SST DG
Lowering time:
HDL 6500 SST DG
HDL 7000 SST DG
HDL 8000 SST DG
Operating voltage:
Motor capacity:
HDL 6500 SST DG
HDL 7000 SST DG
HDL 8000 SST DG
Motor speed:
HDL 6500 SST DG
HDL 7000 SST DG
HDL 8000 SST DG
Oil pump conveying
power:
HDL 6500 SST DG
HDL 7000 SST DG
HDL 8000 SST DG
Operating pressure:
HDL 6500 SST DG
HDL 7000 SST DG
HDL 8000 SST DG
Lift pressure relief valve:
HDL 6500 SST DG
HDL 7000 SST DG
HDL 8000 SST DG
OPI-POWER LIFT HDL 6500 SST DG-7000 SST DG-8000 SST DG - HYMAX H 6500 DG-H 7000-V1.0-DE-EN-FR-ES-IT
98
6500 kg
7000 kg
8000 kg
Max. 3:1 or 1:3 mm or
against the drive-in di-
rection
Max. 3:1 mm or against
the drive-in direction
approx. 70 sec.
approx. 70 sec.
approx. 70 sec.
approx. 55 sec.
with CE stop
approx. 55 sec.
with CE stop
approx. 55 sec.
with CE stop
3 x 400 Volt, 50 Hz
2 x 1.5 kW
2 x 1.5 kW
2 x 1.5 kW
1440 rpm
1400 rpm
1400 rpm
4,2 cm³ (980332)
4,2 cm³ (980332)
4,2 cm³ (980332)
approx. 200 bar
approx. 220 bar
approx. 250 bar
approx. 230 bar
approx. 250 bar
approx. 280 bar
Operating pressure un-
locking cylinders:
Oil container filling vol-
ume:
Noise level LPA:
on-site connection:
3.2

Safety devices

• Over-pressure valve
Hydraulic system fuse against over-pressure
• Check valve
Secure the vehicle against unauthorised lowering
• Lockable main switch
Fuse to prevent unauthorised use
• CE-Stop
Guard against crushing in the foot area
• Hydraulically unlockable safety system on the
cylinders
Secure against unauthorised lowering of the lift.
• Up Off
Safety against a vehicle driving too widely onto
the lift.
• Pneumatic lifting arm block
Safety against adjusting the lifting arm
approx. 35 bar
Per unit approx. 17 litres
≤ 70 dB
3~/N+PE, 400 V, 50 hz
with 16 A fuses, slow,
according to VDE regu-
lations