Password Authentication; Connecting To The Camera By Using A Rtsp Player; Connecting To The Network Camera By Using A Mobile Phone - Abus TVIP41550 Manuel Utilisateur

4.5 Password authentication

At factory default there is no admin password set for accessing the camera. For security reasons the
administrator should immediately set a password after the initial setup. After setting an admin password the
camera will request for every access a username and password.
The permanent default username for the admin will be „„root" and cannot be changed. The only way to reset
the password if it is forgotten is to reset the camera to factory default settings.
In order to access the camera enter username "root" and the before defined password.
-> After successful authentication you will connect to the camera and a video stream will be displayed.

4.6 Connecting to the camera by using a RTSP player

You can display the MPEG-4 video streams by connecting to the camera with a RTSP capable media player.
Following free media players support RTSP:

VLC Media Player

Real Player

QuickTime Media Player
The RTSP address has to be entered as following:
rtsp://<IP-address of the network camera>:<rtsp Port>/<Name of the video stream >
How to change the name of the video stream will be explained further on.
Example:
rtsp://192.168.0.99:554/live.sdp

4.7 Connecting to the network camera by using a mobile phone

Make sure that your mobile phone is able to establish a internet connection. Furthermore the mobile phone
has to have an RTSP capable media player like:

Real Player

Core Player
More information you can find in chapter "RTSP-Transmission".
72
English