Day/Night Settings; Audio Settings; Motion Detection - Abus TVIP41550 Manuel Utilisateur

Compression
Recording duration
1 minute
video sequence
in 720p resolution
with "good" quality
Storage capacity
32 GB Micro SD
card
At the end of the manual you can find a detailed table with every quality setting combined with
every resolution.

10.6 Day/night settings

Define the settings for the camera day/night mode here. These settings are used for the following functions:
- Activating the day/night profile for internal motion detection by the network camera
- Activating the white light LEDs in night mode

10.7 Audio settings

"Mute" All audio functions in the video server are deactivated. A note appears when you access the
video server.
"External microphone/audio amplification" Adjust the value from +21 db to -33 db.
"Audio type" Select the audio type and desired bit rate. A higher value requires more bandwidth:

"AAC" (Advanced Audio Coding) Special codec for audio data compression under MPEG-4/H.264.

"GSM-AMR" (Global System for Mobile Communications – Adaptive Multi Rate) Voice codec in GSM
mobile telephone network.

"G.711" pmca/pmcu (Pulse Code Modulation).

11. Motion detection

You can activate up to three motion zones in the video server. Select "Enable motion detection", to
configure the function.
The motion detection function is only active once you have defined an action under the
"Application" menu item.
H.264
Approx. 20 MB
Approx. 27 hours
MPEG-4
Approx. 30 MB
Approx. 18 hours
95
English
MJPEG
Approx. 160 MB
Approx. 4 hours