Ieee 802.1X; Http; Ftp - Abus TVIP41550 Manuel Utilisateur

Masquer les pouces Voir aussi pour TVIP41550:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

If the IPv6 settings are correct, you can read all the settings in the lower window.
6.5.2

IEEE 802.1x

Activate this function if your network environment uses the standard IEEE 802.1x, a port-based access control
in the network.
IEEE 802.1x improves the security of local networks.
A connection is only permitted if all certificates between the server and "client" have been verified. They are
authenticated by a switch/access point, which sends queries to the RADIUS authentication server.
Otherwise no connection is made and access to the port is denied.
Please note that your network components and the RADIUS server must support the
standard IEEE 802.1x.

6.5.3 HTTP

"HTTP port" This port can be different from the standard port 80 (80, or 1025 – 65535). If this port is
changed, users must be informed to ensure a successful connection. Example: If the administrator changes
the HTTP port of the video server with the IP address 192.168.0.99 from 80 to 8080, users have to enter
"http://192.168.0.99:8080" in the web browser instead of "http://192.168.0.99".
"Secondary HTTP port" Additional HTTP port for the video server access
For the direct access to individual video streams over the web, the following access names can be configured.
Access is gained via compressed JPEG images and allows web browsers (Firefox, Netscape) which cannot
process ActiveX plug-ins to access the video stream directly:
"Access name for stream 1" Access name for the MJPEG stream 1
"Access name for stream 2" Access name for the MJPEG stream 2
"Access name for stream 3" Access name for the MJPEG stream 3
"Access name for stream 4" Access name for the MJPEG stream 4
Note: Internet Explorer does not support the display of MJPEG images without Active

6.5.4 FTP

"FTP port" This is the internal FTP server port. It can be a different port to the standard port 21
(21, or 1025 – 65535). The video data saved on the video server can be called up directly via FTP.
Use a separate FTP program for this purpose.
The address format for entering the connection data is as follows:
Server: IP address of the video server
User name: Administrator user
Password: Password of administrator
Port: FTP port of the video server
82
English

Publicité

Table des Matières
loading

Table des Matières