Num'axes CANICOM Soft Guide D'utilisation page 18

Gb - 18
Diagram 4
Activate/Deactivate a receiver
collar with a remote control
Place these 2 areas
together during 1 second
 Coding of the remote control and receiver collar
Each remote control has its own individual radio operator code. The coding of the remote control with the
receiver collar enables the two units to work together.
IMPORTANT: before beginning the coding, make sure no other person is using his CANICOM Soft.
Soft or other products from the NUM'AXES range close by: your receiver collar could accidentally
record the code of his remote control. If that occurs, re-code the remote control with the receiver collar.
CODING PROCEDURE
1 To begin the coding procedure, the remote control must be ready for use (battery in its housing).
NUMAXES guide canicom soft -B.indd 18 13/06/2017 09:34