Install Trim Pieces - KitchenAid KUDH03DTSS Instructions D'installation

1. Open bottom drawer.
2. Push in clips and slide rails back 5" (12.7 cm).
3. Lift drawer off slide rails. Place drawer off to the left on
covering. Slide rails into dishwasher.
4. Rest trim strip on floor and mark trim at the top of the frame
flange height. Pick the closest groove to the mark. If the mark
is between two grooves, choose the groove that makes the
trim strip the shortest. On a covered surface, cut the trim strip
at the selected groove.
5. Attach the toe kick bracket to the frame.
14

Install Trim Pieces

6. Place trim strip into toe kick bracket.
7. Attach toe kick bracket on the opposite side.
8. Place flexible side trim strips on both sides as shown.