Install Trim Pieces And Level Dishwasher - KitchenAid KUDD03DTPA Instructions D'installation

Lave-vaisselle à double tiroir
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WARNING
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector in
terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
3. Connect wires as follows using twist-on connectors sized to
connect direct wire to 16 gauge dishwasher wire.
Power supply wire:
white
black
ground wire
4. Attach ground wire to the green ground screw.
A
A. Attach ground wire to green screw.
B. Attach white and black wires.
All manuals and user guides at all-guides.com
Terminal box wire:
white
black
ground connector
B
5. Reinstall electric box cover with all wires contained inside the
terminal box.
NOTE: Do not plug cord into outlet until instructed to do so.

Install Trim Pieces and Level Dishwasher

1. Open bottom drawer.
2. Push in clips and slide rails back 5" (12.7 cm).
3. Lift drawer off slide rails. Place drawer off to the left on
covering. Slide rails into dishwasher.
4. Slide the dishwasher into position in the cabinet opening.
Check to ensure that the drain hose and electrical wiring are
not kinked.
13

Publicité

Table des Matières
loading

Table des Matières