Route Water Supply Line And Drain Hose - KitchenAid KUDD03DTPA Instructions D'installation

1. Connect water supply line to water valve on dishwasher.
2. Slide clamp onto drain hose, and then push hose into "Y"
connector until fully seated. Several clicks will be heard.
3. Slide clamp into position over the "Y" connector.
10
All manuals and user guides at all-guides.com

Route Water Supply Line and Drain Hose

Option 1: Right-hand side utility access
For right-hand routing, place the water supply line in the
clips.
Route drain hose on clips on bottom/back of unit.
Option 2: Left-hand side utility access
For left-hand routing, place hose in clip on bottom right-
hand side of the dishwasher.