Table des Matières
Publicité
SAFETY INSTRUCTIONS
17. Connection plug boards must be fixed
properly for easy plugging and unplugging.
Plugs and connection plug boards must
be located in such a way that no fluids
come into contact with electrical
equipment when the office furniture is
used properly.
18. The power cable must be secured in the
strain relief. Interconnecting cables may
be run loosely. All lines and cables must
be run in such a manner as to avoid
mechanical damage
(i.e., shearing, abrasion,...).
19. If the furniture has movable or height-
adjustable parts, then particular care must
be taken: Cables must be sufficiently long
to allow height adjustments without
damaging the cables and wiring
(i.e., stretching, crushing, ...).
20. If the electrical cable of this device is
damaged, it must be replaced by the
manufacturer or by its customer service
or by a similarly qualified person to
avoid risks.
21. Do not spill liquids into control unit or
power supply unit to avoid electrical
shock or short circuits.
22. The operation of the control mechanism
and the power supply unit requires a
minimum of 5°C and a maximum
temperature of 40°C.
12
Publicité
Table des Matières
