Table des Matières
Publicité
SAFETY INSTRUCTIONS
8. Make sure that there are safety gaps of at
least 25 mm for movable parts (this also
applies to organisational elements that are
attached above or below the furniture or
hanging from nearby walls, as well as to
building fixtures, such as open windows).
9. The protection against uncontrolled
movement does not prevent objects and
not people (body parts) being trapped! For
physical reasons, "soft" obstacles are not
easily recognised and evaluated, if at all.
10. If the desk hits an obstacle, that obstacle
might be damaged (scratching, marks,
etc.) because the desk is lifted at
nominal speed.
11. It is not allowed to change or modify the
control mechanism or the control element.
12. Never attempt to open the enclosure of
the control unit or the power supply unit.
Unauthorised opening of the enclosure
and improper repairs can cause danger
and voids the warranty.
13. Only professionals authorised by the
manufacturer may carry out any main-
tenance or reparations.
14. Do not operate devices in explosive
environments.
15. This furniture is only certified for
commercial office and administrative
areas within rooms.
16. The manufacturer assumes no liability for
damage resulting from improper use.
11
Publicité
Table des Matières
