Safety Instructions; Proper Use - Becker WindControl Instructions De Service

Warning
Caution
Note
E
N
G
L
I
S
H
The WindControl and related drives are developed, manufactured, inspected and documented in accordance with
the current state of technological development and under observance of the relevant safety standards. The system
and units serve exclusively to control awnings with BECKER drives.
Any other or a use beyond this is considered an abuse of the equipment. If the control units and drives are used for
other purposes than those specified above, or if modifications are made to the units, which affect the safety of the
system, then the manufacturer or supplier accepts no liability for resulting injuries to persons or damage to property
nor for any consequential damages.
The information in the operating manual must be observed when operating the system or during repair. In the event
of improper handling, the manufacturer or supplier accepts no liability for injuries arising to persons or damage to
property nor for any consequential damages.
16

Safety Instructions

The following safety instructions and warnings are used to avert dan-
gers as well as to prevent injuries to persons or damage to property.
Denotes a potentially hazardous situation. If this is not avoided, inju-
ries may result.
Denotes a potentially hazardous situation. If this is not avoided, the
product or something in its immediate vicinity may be damaged.
Denotes application tips and other useful information.
Warning
Only spare parts, tools and additional equipment issued
by BECKER may be used. The manufacturer or supplier
accepts no liability for injuries arising to persons or dam-
age to property nor for any consequential damage with
regard to non-authorised products or modifications.
During the operation of electrical or electronic equip-
ment, certain components are under a dangerous electri-
cal voltage. In the event of unqualified intervention or
non-observance of warnings, physical injuries or dam-
age to property may arise.
Maintenance and repair of electrical or electronic equip-
ment must only be performed by qualified personnel.

Proper Use

Operating Manual WindControl