Warranty; Application; Parts And Options; I S H - Becker WindControl Instructions De Service

Operating Manual WindControl
BECKER-Antriebe GmbH will be released from all warranty and product liability obligations if the customer modi-
fies the equipment without prior approval from BECKER-Antriebe GmbH or if the equipment is installed incorrectly
and/or contrary to the specified installation instructions, by the customer or a third party.
Any further processing must comply with all current statutory and official regulations governing manufacture and
advice to customers, especially the EMC regulations.
This product is subject to technical developments and improvements. Please refer to the current sales brochure for
the precise product specifications.
The BECKER WindControl is designed for use with BECKER tubular drives in sunshade systems. This control
protects the awning from damage by excessively strong winds.
If the unit is retrofitted with a radio and light sensor, the system becomes a sunshade control. The light threshold
value is set conveniently by radio.
The scope of supply of the complete WindControl set
consists of:
• WindControl control unit
• AN2 wind transmitter
• Installation and operating manual
• Set of installation accessories for the wind transmitter
• Radio receiver
• LS10 light sensor
• Alpine-white wall transmitter "TouchControl"
or
• Cream-white wall transmitter "TouchControl"

Warranty

Application

Parts and Options

E
N
G
L
I
S
H
15