General; Warranty; Safety Information - Becker Centronic SensorControl SC431-II Notice De Montage Et D'utilisation

Assembly and Operating Instructions
The easytoinstall SC431II operates your shutter/sun protection system on the
basis of the preset sun and twilight threshold values. The device also comes
with a broken glass sensor.
The SC431II can be operated manually at any time.
Structural modifications and incorrect installation which are not in accordance
with these and our other instructions can result in serious injuries, e.g. crushing
of limbs. Therefore, structural modifications should only be carried out with our
prior approval and in accordance with our instructions, particularly the informa-
tion contained in these Assembly and Operating Instructions.
Any further processing of the products which does not comply with their intend-
ed use is not permitted.
The end product manufacturer and fitter have to ensure that all the current statu-
tory, official regulations and, in particular, EMC regulations are adhered to dur-
ing utilisation of our products, especially with regard to end product assembly,
installation and customer advice.
Caution
Please keep the instructions in a safe place!
• Use in dry rooms only.
• Use unmodified Becker original parts only.
• Keep persons away from the system guide track.
• Keep children away from controls.
• Please comply with national stipulations.
• Dispose of used batteries properly. Replace batteries by an identical
type (CR 2032) only.
• If the system is controlled using one or several transmitters, the sys-
tem guide track must be visible during operation.
• The equipment contains small parts that could be swallowed.
12

General

Warranty

Safety Information