Intended Use - Becker Centronic SensorControl SC431-II Notice De Montage Et D'utilisation

The SC431II may be used to operate roller shutters and sun protection systems
only.
• Please note that radio sets cannot be operated in areas with increased risk of
interference (e. g. hospitals, airports).
• The remote control is only permitted for equipment and systems with which
a malfunction in the handheld transmitter or receiver does not present a risk
to persons, animals or objects, or this risk is covered by other safety devices.
• The operator does not enjoy any protection from disturbances by other re-
mote signalling equipment and terminal equipment (for example, also by
radio sets operated in the same frequency range in accordance with regula-
tions).
Note
Ensure that the controls are not installed and operated in the vicinity of
metal surfaces or magnetic fields.
Radio sets transmitting at the same frequency could interfere with re-
ception.
It should be noted that the range of the radio signal is restricted by leg-
islation and constructional measures.

Intended use

de
en
fr
nl
13