Product Features; Manufacturer's Declaration; Technical Data - Bosch 0 607 951 300 Instructions De Montage

OBJ_BUCH-1656-002.book Page 13 Friday, December 9, 2016 1:05 PM

Product Features

The numbering of the product features refers to the illustra-
tions on the graphics page. The illustrations are partly sche-
matic and may vary from your pneumatic motor.
1 Drive spindle
2 Clamping area (collar)
3 Hose connection for right rotation
4 Hose connection for left rotation
(only for pneumatic motors with right/left rotation)
5 Air outlet with silencer
6 Threaded ring
7 Hook wrench
8 Fastening flange*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

For dimensional drawings and dimensions, see page 241 onwards.
Pneumatic Motor 0 607 951 ...
Article number ... 300
-1
No-load speed min
Stalling torque Nm
Output power W
Right rotation
Left rotation
Spindle dimension
– 3/8"-24 UNF-2A
Max. operating pressure at bar
motor
psi
Thread size of hose
connection G 1/8"
Inner diameter of hose mm
Air consumption at l/s
no-load
cfm
Weight according to EPTA- kg
Procedure 01:2014
lbs
Bosch Power Tools

Manufacturer's declaration

Declaration for installation of an incomplete machine
The pneumatic motor described under "Technical data"
meets the fundamental requirements of directive
2006/42/EC, appendix I, 1.1.3, 1.3.2, 1.3.4, 1.5.3, 1.5.10
and 1.5.11. The special technical documents in accordance
with appendix VII B of this directive have been created and
can be delivered by post to government organisations upon
reasonable request.
The pneumatic motor must not be put into operation until the
conformity of the end product with the provisions of directive
2006/42/EC has been ascertained.
Technical file (2006/42/EC) at:
Robert Bosch Power Tools GmbH, PT/ECS,
70538 Stuttgart, GERMANY
Henk Becker
Chairman of
Executive Management
Robert Bosch Power Tools GmbH
70538 Stuttgart, GERMANY
Stuttgart, 19.02.2020
... 301 ... 302 ... 303
600 930 1620 3300
25 15 9 4.5
370 370 370 370
   
– – – –
   
6.3 6.3 6.3 6.3
91 91 91 91
G 1/8" G 1/8" G 1/8"
8 8 8 8
12.5 12.5 12.5 12.5
26.5 26.5 26.5 26.5
0.87 0.87 0.92 0.84
1.92 1.92 2.00 1.85
English | 13
Helmut Heinzelmann
Head of Product Certification
PT/ECS
... 304 ... 305 ... 306 ... 307
490 780 1400 2700
25 15 9 4.5
340 340 340 340
   
   
   
6.3 6.3 6.3 6.3
91 91 91 91
G 1/8" G 1/8" G 1/8" G 1/8"
8 8 8 8
14.5 14.5 14.5 14.5
30.7 30.7 30.7 30.7
0.87 0.87 0.92 0.84
1.92 1.92 2.00 1.85
1 609 92A 37R | (9.12.16)
... 322
540
22
370

–

6.3
91
G 1/8"
8
11.5
24.4
0.87
1.92