Product Description And Specifications; Intended Use; Product Features - Bosch UniversalDetect Notice Originale

OBJ_BUCH-3069-001.book Page 20 Tuesday, April 18, 2017 2:39 PM
20 | English
 Make sure that you are properly earthed when taking measurements. If you
are not properly earthed (e.g. by wearing insulating footwear or by standing on a
ladder), it will not be possible to locate live cables.
 If there are gas pipes in the building, check to ensure that none of them have
been damaged after completing any work on walls, ceilings or floors.
 It is easier to find live cables if electricity consumers (e.g. lights, appliances) are
connected to the cable you are searching for and are switched on. Switch off elec-
tricity consumers and remove the fuse before drilling, sawing or milling into
walls, ceilings or floors. After performing any kind of work, check to ensure
that objects placed on the base material are not live.
 When attaching objects to dry walls, and in particular when attaching them to
the substructure, check to ensure that both the wall and the fastening mate-
rials have a sufficient load-bearing capacity.
 Do not operate the measuring tool in explosive environments, such as in the
presence of flammable liquids, gases or dusts. Sparks can be created in the
measuring tool which may ignite the dust or fumes.

Product Description and Specifications

Intended Use

The measuring tool is designed to find metals (such as copper pipes or reinforcing
steel) and live cables in walls, ceilings and floors, and to detect wooden beams in dry
walls.

Product Features

The numbering of the product features shown refers to the illustration of the measur-
ing tool on the graphic page.
1 Sensor area
2 Wall sensor/type plate
3 Serial number
4 Battery lid
5 On/Off button
6 Touchscreen display
7 Illuminated ring
8 Marking hole
The accessories illustrated or described are not included as standard delivery.
1 609 92A 3P0 | (18.4.17) Bosch Power Tools