Sleep-Interval Settings Of De-Aeration Function; Clarification Of Menu Icons - Wilo Sinum MP M-2-50 Notice De Montage Et De Mise En Service

7.4. Sleep-interval settings of de-aeration function
Example of sleep interval: 1 day with intervals 2 and 3
00:00 Blocked 10:00
7.5. Clarification of menu icons
Button functions must be unlocked
(locking occurs 10 minutes after the last key press).
Waiting for evaluation to complete.
Input and/or output signal of the capacity sensor
does not exist (check signal line, capacity sensor).
Entry confirmed
Entry rejected, not possible, editing limit exceeded.
Vessel calibration with value outside of the upper
range (empty vessel, rule out malfunctions, align
vessel, repeat calibration).
Vessel calibration with value outside of the lower
range (align vessel, rule out malfunctions, repeat
calibration).
Installation and operating instructions Wilo-Sinum
Closing
times
NO. Default,
Interval
1 00:00 - 08:00
2
00:00 - 10:00
3 18:00 - 23:59.99
Type MPM; DPM
09:30 - 23:59.99
4 00:00 - 23:59.99
4-5 00:00 - 00:00
Example of change menu
Degassing
18:00 Blocked 23:59.99
Closing
interval
Interval Interval assignment
Menu Day Default,
interval
8-5-6-1-1 assignment
8-5-6-1-2 1 1; 3
8-5-6-1-2 2 1; 3
3 1; 3
4 1; 3
8-5-6-1-4 5 1; 3
8-5-6-1-... 6 2; 3
Type MPM; DPM:
4
7 4
Interval 1
Memory error, loss of values (» Service)
Values have not levelled off in vessel calibration
(rule out malfunction, repeat calibration).
Commissioning by service required.
Monday
Menu
8-5-6-2-1...
8-5-6-3-1...
8-5-6-4-1...
8-5-6-5-1...
8-5-6-6-1...
8-5-6-7-1...
8-5-6-8-1...
Fig. FM.053.V01.15
Fig. FM.054.V01.15
English
23