General Information; About These Instructions; Safety; Safety Information - Wilo Connect Modul Yonos MAXO Mode D'emploi

1

General information

1.1

About these instructions

These installation and operating instructions are an integral part of
the product. Read these instructions before commencing work and
keep them in an accessible place at all times. Strict adherence to
these instructions is a requirement for intended use and correctly
operating the product. All specifications and markings on the
product must be observed. These installation and operating in-
structions correspond to the relevant version of the device and the
underlying safety standards that apply at the time of going to print.
The language of the original operating instructions is German. All
other languages of these instructions are translations of the original
operating instructions.
2

Safety

2.1

Safety information

This section contains basic information which must be adhered to
during installation, operation and maintenance. Failure to follow the
installation and operating instructions will result in injuries to per-
sons, damage to the environment and the device and result in the
loss of any claims for damages. Failure to follow the instructions
will, for example, result in the following risks:
ƒ
Injury to persons from electrical, mechanical and bacteriological
factors as well as electromagnetic fields
ƒ
Environmental damage from leakage of hazardous substances
ƒ
Damage to property
ƒ
Failure of important product functions
ƒ
Failure of required maintenance and repair procedures
Installation and operating instructions Wilo-Connect Modul Yonos MAXO
The directions and safety instructions in the other sections must
also be observed!
2.2

Identification of safety instructions

These installation and operating instructions set out safety instruc-
tions for preventing personal injury and damage to property, which
are displayed in different ways:
ƒ
Safety instructions relating to personal injury start with a signal
word and are preceded by a corresponding symbol.
ƒ
Safety instructions relating to property damage start with a sig-
nal word and are displayed without a symbol.
Signal words
ƒ
Danger!
Failure to observe safety instructions will result in serious injury
or death!
ƒ
Warning!
Failure to follow instructions can lead to (serious) injury!
ƒ
Caution!
Failure to follow instructions can lead to property damage and
possible total loss.
ƒ
Notice!
Useful information on handling the product
Symbols
These instructions use the following symbols:
General danger symbol
Danger of electric voltage
en
17