Operation - SATA SATAjet 3000 K RP Mode D'emploi

Operating Instructions SATAjet 3000 K (RP/HVLP)
EN
Spray distance
recommended
RP
recommended
HVLP
Lombardy / Italy
Air consumption
RP
HVLP
Max. material temperature
Weight

8. Operation

Risk of injury from bursting compressed air hose
If an unsuitable compressed air hose is use, it can be damaged by too
much pressure and explode.
→ Only use solvent-resistant, antistatic and technically flawless hose for
compressed air with permanent pressure resistance of 10 bar, bleeder
resistance of < 1 MOhm and min. inner diameter of 9 mm (see chap-
ter 14).
Risk of injury from excessive material input pressure
Excessive material input pressure can cause bursting of the material
hose and other components conveying material.
→ The material input pressure stated on the gun may not be exceeded.
118
430 Nl/min at 2,5 bar
560 Nl/min at 2,5
Warning!
Warning!
see marking/details on the gun
17 cm - 21 cm
10 cm - 15 cm
10 cm - 15 cm
bar
50 °C
570 g
17 cm - 21 cm
4" - 6"
4" - 6"
15.2 cfm at 35 psi
19.8 cfm at 35 psi
122 °F
20.1 oz.