Operation - SATA jet 1500 B Mode D'emploi

Operating Manual SATAjet 1500 B RP/HVLP
Air consumption
RP
HVLP
Max. material temperature
Weight
Weight (without material) plastic
flow cup 600 ml
Weight (without material)
RPS cup 600 ml
Weight (without material)
aluminium flow cup 750 ml
Weight (without material)
aluminium flow cup 1000 ml

9. Operation

Risk of injury from bursting compressed air hose
If an unsuitable compressed air hose is use, it can be damaged by too
much pressure and explode.
→ Only use solvent-resistant, antistatic and technically flawless hose
for compressed air with permanent pressure resistance of min. 10 bar,
bleeder resistance of < 1 MOhm and min. inner diameter of 9 mm
(# 53090).
Damage from dirty compressed air
Using soiled compressed air can cause malfunctions
.
→ Use clean compressed air. For example with SATA filter 100
(# 148247) outside the spray booth or SATA filter 484 (# 92320) inside
the spray booth.
Before using the spray gun, heed / check the following points to warrant
290 Nl/min at 1,8
350 Nl/min at 1,8
50 °C
604 g
484 g
598 g
629 g
Warning!
Attention!
10.2 cfm at 26
bar
12.4 cfm at 26
bar
122 °F
21.3 oz.
17.1 oz.
21.1 oz.
22.2 oz.
EN
psi
psi
125