General Information - SATA SATAjet 3000 K RP Mode D'emploi

Operating Instructions SATAjet 3000 K (RP/HVLP)
Content [Original Version: German]
1. General information .............113
2. Safety Instructions ...............114
3. Intended Use .......................116
4. Description ..........................116
5. Scope of Delivery ................116
6. Technical Design .................117
7. Technical Data .....................117
8. Operation .............................118
9. Maintenance and repairs .....121
Read these operating instructions thoroughly and carefully before com-
missioning and use. Comply with the safety instructions and danger
warnings!
Always make sure that these operating instructions and the operating in-
structions for the spray gun are kept with the product or keep them easily
accessible for everyone at any time!

1. General information

1.1. Introduction
These operating instructions contain important information for operating
the SATAjet 3000 K RP/SATAjet 3000 K HVLP, referred to hereinafter as
spray gun. They also describe commissioning, maintenance and servic-
ing, care and storage as well as troubleshooting.
1.2. Target group
This operating manual is intended for
■ Painting and varnishing professionals.
■ Trained personnel for varnishing work in industrial and craftman's work-
shops.
1.3. Accident prevention
As a basic principle, the general and specific national accident prevention
regulations must be heeded, together with corresponding workshop and
industrial safety instructions.
Read first!
10. Care and storage .................125
11. Malfunctions ........................126
12. Disposal ...............................127
13. After Sales Service ..............128
14. Accessories .........................128
15. Spare Parts .........................128
16. EU Declaration of
Conformity ...........................129
EN
113