General Information; Warranty And Liability - SATA SATAjet 1000 A RP Mode D'emploi

Operating Instructions SATA Automatic Gun
Content [Original Version: German]
1. General information .............. 123
2. Safety Instructions ................ 124
3. Intended Use ........................ 126
4. Technical Data ...................... 126
5. Scope of Delivery ................. 126
6. Technical Design .................. 126
7. Description ........................... 127
1.

General information

1.1. Introduction
These operating instructions contain important information for operating
the automatic gun. They also describe assembly, operation, care, main-
tenance, cleaning, warnings and error messages together with trouble-
shooting.
1.2. Target group
This operating manual is intended for
■ Painting and varnishing professionals.
■ Trained personnel for varnishing work in industrial and craftman's work-
shops.
1.3. Accident prevention
As a basic principle, the general and specific national accident prevention
regulations must be heeded, together with corresponding workshop and
industrial safety instructions.
1.4. Replacement, accessory and wear-and-tear parts
Always only use original SATA accessories, spare parts and wear parts.
Accessories not supplied by SATA have not been tested and approved.
SATA assumes no liability for damage caused by the use of non-approved
spare parts, accessories and wear parts.

1.5. Warranty and liability

The SATA General Conditions of Sale and Delivery and further contractual
agreements, if applicable, as well as the valid legislation at the time apply.
SATA is not liable in case of
8. Assembly .............................. 127
9. Operation .............................. 129
10. Maintenance and repairs ...... 132
11. Care and storage .................. 137
12. Malfunctions ......................... 138
13. Customer service and spare
parts ..................................... 140
14. EU Declaration of
Conformity ............................ 141
EN
123