Safety Instructions - SATA SATAjet 1000 A RP Mode D'emploi

Operating Instructions SATA Automatic Gun
EN
■ When the operating instructions are disregarded.
■ When the product is used in other than the intended ways of usage.
■ When untrained staff is employed.
■ When no personal protection equipment is worn.
■ Failure to use original accessories, spare parts and wear parts
■ When the product is manipulated, tampered with or technically modi-
fied.
■ Natural wear / and tear
■ In case when the product has been exposed to untypical shockloads
and impacts during usage.
■ Assembly and disassembly
2.

Safety Instructions

Always read and heed all instructions given below. Failure to comply or
incorrect compliance can result in malfunctions or cause injuries.
2.1. Requirements regarding personnel
The automatic gun may only be used by experienced skilled workers and
instructed persons who have thoroughly read and understood these oper-
ating instructions. People whose reactions have been adversely affected
by drugs, alcohol, medication or by any other means are prohibited from
handling the automatic gun.
2.2. Personal Protection Equipment
Always use approved breathing, hearing and eye protection, suitable
protective gloves, workwear and safety boots when using the automatic
gun and during cleaning and maintenance work. The noise level during
production can exceed 85 dB(A).
2.3. Use In Explosive Areas
The automatic gun is approved for use storage in explosive atmospheres
of ex-zone 1 and 2.The product labelling must be adhered to.
• The following applications and operations lead to the loss
of the explosion protection and are, therefore, prohibited:
124
Warning! Risk of explosion!