Warranty And Liability; Safety Instructions - SATA BVD Mode D'emploi

EN Operating Instructions

1.5. Warranty and liability

The SATA General Conditions of Sale and Delivery and further contractual
agreements, if applicable, as well as the valid legislation at the time apply.
SATA is not liable in case of
■ non-adherence to the operating manual.
■ use of untrained personnel.
■ incorrect use of the product.
■ failure to use personal protective equipment.
■ failure to use original accessories, spare parts and wear parts.
■ unauthorised alterations or technical modifications.
■ natural wear and tear.
■ exposure to non-typical impact stress.
■ inadmissible assembly and dismantling work.
2.

Safety Instructions

Read and comply with all directions listed in the following. Non-compli-
ance or incorrect compliance can lead to malfunctions or severe injuries
and even death.
2.1. Requirements regarding personnel
The pressurized cup may only be used by experienced and trained per-
sons who have thoroughly read and understood these operating instruc-
tions. Do not use the pressurized cup when tired or under the influence of
drugs, alcohol or medication.
2.2. Personal Protection Equipment
Always use approved breathing and eye protection, hearing protection
and protective gloves, workwear and safety boots when using the pres-
surized cup and during cleaning and maintenance work.
2.3. Use In Explosive Areas
The pressurized cup is approved for use / storage in potentially explosive
atmospheres of ex-zone 1 and 2. Heed the product ID.
2.4. Safety Instructions
Technical status
■ Check the functions and check for any leaks each time before using in
combination with the spray gun.
■ Do a visual inspection of the pressurized cup to check for any signs of
damage or deformation.
■ Never use the pressurized cup when damaged or when components
28
SATA BVD