Safety Instructions; Explosion Risk - SATA jet 1000 ROB RP Mode D'emploi

■ independent conversions or technical changes.
■ natural wear and tear.
■ abnormal impact.
■ impermissible assembly and disassembly work.
2.

Safety Instructions

Always read and heed all instructions given above. Failure to comply or
incorrect compliance can result in malfunctions or cause severe injuries.
Local safety, accident prevention, work and environment protection regula-
tions are mandatory!
2.1. Requirements regarding personnel
The automatic gun may only be used by skilled workers and instructed
persons who have thoroughly read and understood these operating in-
structions.
2.2. Personal protection gear (PSA)
Vapours can be emitted during the usage, maintenance and care of the
automatic gun. It is possible for the sound pressure level to exceed 85
dB(A) during use.
■ Always use approved personal protective equipment during the usage,
maintenance and cleaning of the automatic gun. The personal protec-
tive equipment consists of breathing and eye protection equipment,
protective overall, protective gloves and safety boots. Wear suitable
hearing protection.
2.3. Use In Explosive Areas

Explosion risk!

Incorrect use of the automatic gun can jeopardise the explosion protec-
tion.
→ Do not bring the automatic gun into potentially explosive atmospheres
of ex-zone 0.
→ Do not use any solvents and cleaning agents based on homogenised
hydrocarbons.
The automatic gun is approved for use and storage in explosive atmos-
pheres of ex-zone 1 and 2.
The product labelling must be adhered to.
2.4. Safety Instructions
■ Check the functions and check the automatic gun for any leaks every
time before it is used.
SATA ROB Automatic Gun Operating Instructions
EN
121