Cleaning; Safety Guidelines; Cleaning The Appliance - SilverCrest SDBS 2200 A1 Mode D'emploi

Cleaning

GB
IE

Safety guidelines

Cleaning the appliance

16
WARNING! DANGER TO LIFE DUE TO ELECTRIC SHOCK!
Risk of injury when cleaning the appliance!
To avoid risks, observe the following safety instructions:
► Before cleaning the appliance, disconnect the plug from the mains power
socket!
► If necessary, allow the appliance to cool down before cleaning it.
► Never immerse the appliance in water to clean it.
CAUTION
Damage to the appliance!
► To avoid irreparable damage to the appliance, ensure that no moisture
gets into it during cleaning.
► Do not use aggressive scouring cleaners or solvents, or a wire brush or
other abrasive objects, to clean the surfaces.
■ Clean the surfaces of the iron
cloth only.
■ Remove the water tank
■ Unscrew the Calc / Lock / Safe screw cap
thread in the boiler.
NOTE
The Calc / Lock / Safe screw cap
appliance has cooled down.
■ Empty the remaining water out of the boiler into a sink.
■ Pour around 150 ml of vinegar (approx. 5–6% acidity) into the boiler.
■ Screw the Calc / Lock / Safe screw cap
the boiler.
■ Swirl the liquid in the base station
down the appliance on a level fl at surface.
■ After about 15 to 30 minutes, unscrew the Calc / Lock / Safe screw cap
again and tip the vinegar into a sink.
and the base station
and empty it.
anticlockwise out of the
can only be unscrewed once the
anticlockwise into the thread in
around a couple of times and then set
with a soft, damp
SDBS 2200 A1