Anti-Drip System; Anti-Lime Filter; Safety Shutdown; Cleaning And Care - SilverCrest SDBE 2600 B1 Instructions D'utilisation Et Consignes De Sécurité

˜ Additional product features
˜ Anti-drip system
The product features an anti-drip system . This
prevents water from exiting from the soleplate 1
as long as the temperature is too low to produce
steam . This feature prevents water stains on your
clothing .
˜ Anti-lime filter
The product features an anti-lime filter . This is
a permanent water filter . It is not in need of
replacement or maintenance .
To maintain the filter's functionality, only fill the
water tank with tap water .
Do not use any additives . They may damage the
water filter .
˜ Safety shutdown
For safety reasons, the product shuts down when
it is not moved:
Position Cut off time
Horizontal Approximately after 30 seconds
Vertical Approximately after 8 minutes
When the automatic shutdown feature activates,
the operating light 7 flashes and a beep sounds .
The product turns back on automatically when it
is moved .
˜ Cleaning and care
m
DANGER! Risk of electric shock! Always
disconnect the plug 8 from the power outlet
before cleaning the product .
m
WARNING! Do not immerse the product's
electrical components in water or other liquids .
Never hold the product under running water .
Wipe down the product with a slightly damp
cloth .
Do not let any water or other liquids enter the
product interior .
Do not use any abrasive, aggressive cleaners or
hard brushes to clean the product .
Clean the soleplate 1 using a damp cloth and a
mild, non-scouring detergent .
Let all parts dry completely after cleaning .
20 GB/IE
˜ Self-cleaning function
The product features a self-cleaning function to
remove filth and limescale build-up in the steam
channels .
Use the self-cleaning function at least twice per
month .
If you use tap water: Use the self-cleaning
function after every use .
m
DANGER! Risk of electric shock! Always
unplug the plug power 8 before filling the water
tank .
1 . Never fill the water tank past the max mark 13 .
To do so, close the lid of the fill opening 3 .
2 . Turn the temperature control 11 counter-clockwise
all the way to MIN .
3 . Plug the power plug 8 into an appropriate
power outlet .
4 . Set the temperature control 11 to the highest
temperature (turn clockwise all the way) .
5 . Set the steam control 4 to maximum steam
power .
6 . Wait for the product to heat up and the control
light 10 to go off .
7 . Hold the product horizontally over a sink .
8 . Press and hold the self-cleaning button 12 until
no more steam or boiling, soiled water exits the
product .
9 . Empty the water tank of any residual water via
the fill opening 3 .
˜ Storage
Store the product in the original packaging when
it is not in use .
Store the product at a dry location out of the
reach of children .
Store the product with the water tank empty only .
Make sure the power cord 8 is rolled up evenly
and without kinks .