Thread Cutter Button; Needle Stop Position Button; Light Switch; Feed Dog Adjustment Knob - Brother PQ1300 Manuel D'utilisation

Before You Begin (2)

Thread Cutter Button

Note
When the machine stops due to jammed
threads and so forth, do not step on the
foot controller until turning the power off
and moving the needle with the hand
wheel to check the situation. Otherwise
broken needles could result.
The thread cutter trims upper and
bobbin threads at the end of seams.

Needle Stop Position Button

When indicator lamp is lit up, the
machine will stop sewing with the
needle lowered through the
fabric.
When indicator lamp is off,
position of the needle when
sewing stops will be random.
If the safety mechanism is activated,
for example if the thread becomes
tangled, the red lamp flashes.

Light Switch

Push light switch to turn the light
over the sewing area on and off.
Thread Cutter Button
Indicator Lamp
Needle Stop Position Button
Light Switch

Feed Dog Adjustment Knob

Height of feed dogs can be
adjusted to coincide with fabric
weights.
Foot Pressure and Feed Dog Position
(Feed Dogs Down)
(Pin Feeding)
Lightweight Fabrics
Mediumweight Fabrics
Heavyweight Fabrics
Select one of four feed dog positions according to your needs.
Note
If a setting other than is selected, the feed pin will not operate.
Feed Dog Adjustment Knob
Velvet
N
5