Before You Begin; Tension Dial; Power Cord And Foot Controller; Power Switch - Brother PQ1300 Manuel D'utilisation

Before You Begin (1)

Tension Dial

When tighter tension is desired,
turn the tension dial to the right.
Upper and bobbin threads will
meat on right side of the fabric.
When looser tension is desired,
turn tension dial to the left. Upper
and lower threads will then meet
on wrong side of fabric.

Power Cord and Foot Controller

Note
P l e a s e u s e c o m m o n 1 2 0 V
household current.
Plug in cord.
Plug foot controller into machine.
Note
Foot controller: Model N5V
This foot controller can be used for
sewing machine model PQ1300.

Power Switch

Flip power switch to "I" position to
turn on.
To switch power off, flip switch to
"O" position.
Upper Thread Tension
Loosen Tighten
Tension Block
AC120V
Power Cord
Foot Controller
Power Switch

Hand Wheel

Position needle using hand
wheel.
Always turn hand wheel towards
you.

Stitch Length Regulator

Adjust desired stitch length using
stitch regulator dial.

Reverse Stitch Lever

Sewing in reverse is possible
when the reverse stitch lever is in
the lowered position.
Make sure to push the lever all
the way down when reverse
sewing is desired.
Hand Wheel
Reference Mark
1
Stitch Length Regulator
Reverse Stitch
Lever
3