How To Pull Out The Bobbin Thread - Brother PQ1300 Manuel D'utilisation

6 Pull loop to the right.

How to Pull Out the Bobbin Thread

Insert threaded bobbin in sewing
machine and then begin.
1 While gently holding the end of the
thread, turn the hand wheel towards
you to raise the needle.
Turn once to pull out the bobbin
10 14
thread.
Needle (HLX5) Thread
#9 #30 #50
#11 #30
#14 #30
#16 #20
2 Pull out the bobbin thread.
The automatic needle threader
cannot be used with the thread-
#60
needle combinations illustrated in
the chart to the left. Transparent
nylon thread can be used regardless
of the chart, providing the needle
used is a #14 or #16.
3 Pull approximately 15 centimeters of
upper and bobbin threads out.
Lift foot and run both upper and
bobbin threads under and behind
presser foot.