Rolled Hem Foot - Brother PQ1300 Manuel D'utilisation

Basic Sewing (2)
Note
Make sure power is off before changing feet.

Rolled Hem Foot

1 Attach rolled hem foot.
Refer to page 12 for instructions
on changing sewing feet.
2 Insert needle approximately
0.5cm from the edges of the
fabric and sew 2-3 stitches.
3 Raise needle and foot, pull fabric
towards you while gently holding
thread in left hand.
4 Gently pull strands of thread
behind foot as shown.
18 14
0.5cm
0.5cm
5 While holding threads with left
hand, position fabric under foot
with right hand so the edge of the
fabric lies directly under the
needle.
6 Pull gently on threads in left hand
while sewing the first 3-4 stitches
to hold them in place.
7 Fold hem over about .5 cm and
continue feeding folded hem
under foot while sewing.
Rolled Hem