Using Optional Equipment; Auxiliary Audio Equipment - Sony DSX-S100 Mode D'emploi

BEEP
Activates the beep sound: "ON," "OFF."
AUX-A* 1 (AUX Audio)
Activates the AUX source display: "ON,"
"OFF" (page 19).
AUTO OFF
Shuts off automatically after a desired time
when the unit is turned off: "NO," "30S
(Seconds)," "30M (Minutes)," "60M (Minutes)."
SUB/REAR* 1
Switches the audio output: "SUB-OUT"
(subwoofer), "REAR-OUT" (power amplifier).
DEMO (Demonstration)
Activates the demonstration: "ON," "OFF."
DIMMER
Changes the display brightness.
– "AT": to dim the display automatically when
you turn lights on. (Available only when the
illumination control lead is connected.)
– "ON": to dim the display.
– "OFF": deactivate the dimmer.
CONTRAST
Adjusts the contrast for a clear view of the
display, suitable for the installed viewing angle.
The contrast level is adjustable in 7 steps.
LV-METER (Level Meter)
Activates the level meter: "ON," "OFF."
A.SCRL (Auto Scroll)
Scrolls long items automatically: "ON," "OFF."
REPEAT (page 15)
LOCAL (Local Seek Mode)
– "ON": to only tune into stations with stronger
signals.
– "OFF": to tune normal reception.
MONO* 2 (Monaural Mode)
Selects monaural reception mode to improve
poor FM reception: "ON," "OFF."
REG* 2 (Regional)
Restricts reception to a specific region: "ON,"
"OFF" (page 13).
ZAP.TIME (Zappin Time)
Selects the playback time for the ZAPPIN
function.
– "ZAP.TIME-1 (about 6 seconds),"
"ZAP.TIME-2 (about 15 seconds),"
"ZAP.TIME-3 (about 30 seconds)."
LPF* 3 (Low Pass Filter)
Selects the subwoofer cut-off frequency: "OFF,"
"80Hz," "100Hz," "120Hz," "140Hz," "160Hz."
SUB*
3 (Subwoofer Phase)
Selects the subwoofer phase: "NORM," "REV."
HPF (High Pass Filter)
Selects the front/rear speaker cut-off frequency:
"OFF," "80Hz," "100Hz," "120Hz," "140Hz,"
"160Hz."
LOUD (Loudness)
Reinforces bass and treble for clear sound at low
volume levels: "ON," "OFF."
DM+
Activates the DM+ function: "ON," "OFF."
BTM (page 11)
*1 When the unit is turned off.
*2 When FM is received.
*3 When the audio output is set to "SUB-OUT."

Using optional equipment

Auxiliary audio equipment

By connecting an optional portable audio device
to the AUX input jack (stereo mini jack) on the
unit and then simply selecting the source, you
can listen on your car speakers. The volume level
is adjustable for any difference between the unit
and the portable audio device. Follow the
procedure below:
Connecting the portable audio
device
1 Turn off the portable audio device.
2 Turn down the volume on the unit.
3 Connect to the unit.
* Be sure to use a straight type plug.
Adjust the volume level
Be sure to adjust the volume for each connected
audio device before playback.
1 Turn down the volume on the unit.
2 Press (SOURCE/OFF) repeatedly until "AUX"
appears.
After that, "AUX FRONT IN" appears.
continue to next page t
Connecting cord*
(not supplied)
19