English; Safety Notes; General Safety Rules; Product Description And Specifications - Bosch EXAConnecT II + Notice Originale

OBJ_BUCH-816-001.book Page 24 Wednesday, October 30, 2013 2:06 PM

24 | English

English

Safety Notes

General Safety Rules

Read all safety warnings and all in-
WARNING
structions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or seri-
ous injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
Workplace safety
 Keep work area clean and lit. Cluttered and dark areas
invite accidents.
 Do not use the screwdriving system consisting of
EXAConnecT access point, I/O module and BT-EX-
ACT/BT-ANGLE EXACT production cordless screwdriv-
ers in an explosion-hazardous environment in which
flammable liquids, gases or dusts are present. Power
tools create sparks which may ignite the dust or fumes.
Electrical Safety
 Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
 Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the access point, the I/O module
or the power tool. Keep cord away from heat, oil, sharp
edges and moving parts. Damaged or entangled cords in-
crease the risk of electric shock.
Personal safety
 Stay alert, watch what you are doing and use common
sense when operating a screwdriving system. Do not
use a screwdriving system while you are tired or under
the influence of drugs, alcohol or medication. A mo-
ment of inattention while operating the screwdriving sys-
tem may result in serious personal injury.
Screwdriving system use and care
 Store idle screwdriving systems out of the reach of
children and do not allow persons unfamiliar with the
screwdriving system or these instructions to operate
the screwdriving system. Screwdriving systems are dan-
gerous in the hands of untrained users.
 Use the screwdriving system, accessories and tool bits
etc. in accordance with these instructions, taking into
account the working conditions and the work to be per-
formed. Use of the screwdriving system for operations
different from those intended could result in a hazardous
situation.
3 609 929 C48 | (30.10.13)
Safety warnings for access points and expansion
modules
 DANGER! Ensure that the access point and the I/O mod-
ule are not connected to the power supply before you
open them. The access point must be completely de-ener-
gised, otherwise there is a risk of electric shock.
 Do not expose the access point and the I/O module to
rain or wet conditions. Rain or water entering the access
point or the I/O module will increase the risk of electric
shock.
 Keep the access point and the I/O module clean. Dirt
poses a danger of electric shock.
 Check the access point, I/O module, cables and plugs
before each use. Stop using the access point and the
I/O module as soon as you discover damage to them.
Have them serviced only by a qualified repair person
using only identical replacement parts. Damaged ac-
cess points, I/O modules, cables and plugs increase the
risk of electric shock.
 Due to the complexity of the electrical circuitry, the
EXAConnecT access point and the external devices
(Personal Computer, I/O module, signal lamp, scanner,
etc.) must be connected only by personnel trained in
electrical engineering and information technology.
Otherwise the safety of the user and the devices is not en-
sured.
 Read and strictly observe the safety and work instruc-
tions in the operating instructions of the
BT-EXACT/BT-ANGLE EXACT screwdrivers you are us-
ing.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The Bosch BT-EXACT/BT-ANGLE EXACT and EXAConnecT
screwdriving system is intended for driving and loosening
screws and tightening and loosening nuts in the specified di-
mension and performance range. It is not intended for docu-
menting the torque or rotation angle of a screw connection.
The OK or NOK signal results exclusively from a shut-off signal
of the mechanical shut-off clutch, which has to be corre-
spondingly calibrated and which requires continual re-check-
ing. This OK or NOK signal does not permit any conclusions to
be drawn about the quality of a screw connection.
These signals can be analysed and documented using the
EXAConnecT access point and its software. Any modification
of the hardware and/or software or the connection of addi-
tional hardware fundamentally excludes any liability of Robert
Bosch GmbH.
Bosch Power Tools