Ibanez AM53-SRF Mode D'emploi page 44

Tight-End bridge / Tight-End R bridge (for 6-string and 7-string)
Tight-End
Intonation adjustment bolt
String height adjustment screw
ADJUSTING THE ACTION
1 Use an HEX key wrench (2 mm) to loosen the saddle lock bolts.
2 To adjust the saddle height, use the HEX key wrench (2 mm) to turn the
saddle height adjustment screws.
When youʼve fi nished making adjustments, tighten the saddle lock bolts.
※
ADJUSTING THE INTONATION
1 Use an HEX key wrench (2 mm) to loosen the saddle lock bolts.
2 Use a Phillips screwdriver to adjust the saddle position by turning the
intonation adjustment bolt.
3 Use an HEX key wrench (2 mm) to tighten the saddle lock bolts, and use
a Phillips screwdriver to lightly tighten the intonation adjustment screw
in the clockwise direction. (Tighten lightly, so as not to affect the saddle
position.)
※ Make sure that the guitar is tuned correctly before you check the intonation.
STRING REPLACEMENT
To install a new string, pass it through the string stopper ferrule from the back of the guitar body.
42
Saddle lock bolt
Tight-End
Intonation adjustment bolt
String height adjustment screw
Saddle lock bolt