Haverland RCTT LCD Manuel D'installation Et Utilisation page 78

EN 3. OPERATION
5 PARAMETER 5: "RESET"
This parameter allows us to:
• Clear radiator programming.
• Clear all parameters, except the power of your radiator (Advanced parameter 4, page 77).
Step 1:
Access the advanced menu. Using the
buttons select 5.
or
Step 2:
To reset the radiator to factory
defaults, press and hold the
Step 3:
The "reset" process of your radiator will begin.
Once the "reset" process has been completed, the radiator will return to manual mode with
the factory pre-set temperature (20 ºC).
Then, choose the required operating mode. If you choose AUTO mode, you will need to set the
current time and day. Reprogram your radiator and set the parameters you want.
6
PARAMETER 6: END
Step 1:
You have reached the end of the
advanced menu.
Step 2:
Press the
RCTT LCD
78
button.
or buttons to exit the advanced menu.
Parameter 1