Haverland RCTT LCD Manuel D'installation Et Utilisation page 57

3. OPERATION
4
PARAMETER 4: TEMPERATURE SETTING
Parameter 4 allows you to adjust the ambient temperature measured by the radiator. This
calibration compensates for a possible difference between the temperature obtained in the
room by an external thermostat and the temperature programmed in the radiator.
Calibration should be done after 1 day of operation and if there is a large difference between the
room temperature and the ambient temperature measured by the radiator.
1. Place a precision thermometer in the room away from the radiator.
2. After one hour of heating, record the measured temperature on the thermometer.
Step 1:
Access the user menu by pressing
the holding the
displayed.
Step 2:
Successively press the
alternately shows the ambient temperature in the room and the compensation value.
Step 3:
Press the
Step 4:
By pressing the
Once the temperature value has been entered, press the
alternately shows the new temperature and the resulting compensation value (e.g., 22 to 24 ºC).
The compensation range is + 5 ºC / - 5 ºC.
button. Parameter 1 is
or
button to confirm.
or buttons, enter the previously noted temperature value.
buttons until parameter 4 is selected. The display
Ambient temperature
buttons to confirm. The display
EN
Parameter 1
Parameter 4
RCTT LCD
EN
57