Haverland RCTT LCD Manuel D'installation Et Utilisation page 69

3. OPERATION
Press the
THE DATA.
IMPORTANT: Temporary modification of a program in progress
This function allows you to modify the setpoint temperature temporarily until the next
programmed temperature change or when more than 2 hours have elapsed since the
modification.
Step 1:
While the radiator is in Auto mode, press the
temporarily modify the setpoint temperature.
Step 2:
Press
TEMPORARY
MANUAL MODE
This modification will be automatically cancelled at the next programme change or
when more than 2 hours have elapsed since the modification.
IMPORTANT:
• The radiator will operate accordingly to the operating mode (Comfort / Economy /
Anti-frost / OFF) that we see on the screen.
• Do not forget that the radiator must be in AUTO mode for the configured
programming to be fulfilled.
• You can always modify the temperatures assigned for comfort, economy, or anti-
freeze mode, modifying parameter 1, parameter 2 or parameter 3, respectively.
• The temperature shown on the display is the temperature set in the current
operating mode.
• The
button twice to exit the programming menu, WITHOUT SAVING
to confirm.
AUTO MODE
symbol will appear whenever the resistance of the device is running.
EN
or buttons to
RCTT LCD
EN
69