Additional Functions; Function Lock; Child Lock; Settings Menu - Electrolux EOZ5700 Notice D'utilisation

14 www.electrolux.com

9. ADDITIONAL FUNCTIONS

9.1 My Favourite Programme
function
Use this function to save your favourite
temperature and time settings for an oven
function or programme.
1. Set the temperature and time for an
oven function or programme.
2.
Touch and hold
three seconds. An acoustic signal
sounds.
3.
Deactivate the appliance.
Using My Favourite Programme
function:
• To activate the function touch
The appliance activates your favourite
programme.
• To deactivate the function touch
. The appliance deactivates your fa-
vourite programme.
When the function operates, you
can change the time and temper-
ature.

9.2 Child Lock

The Child Lock prevents an accidental
operation of the appliance.
Activating and deactivating the Child
Lock function:
1.
Deactivate the appliance with
not set an oven function.
2.
Touch and hold
same time for 2 seconds. An acoustic
signal sounds.
SAFE comes on or goes out in the
display.
If the appliance has the Pyrolytic
cleaning function and the function
operates, the door is locked.
and SAFE come on in the display
when you touch a sensor field.

Settings menu

Indicator of the setting
for more than
and
menu
SET1
3.
Touch and hold
same time for 2 seconds to deacti-
vate the Child Lock

9.3 Function Lock

You can activate the function only when
the appliance operates. The Function
Lock prevents an accidental change of
the oven function.
Activating / deactivating the Function
Lock function:
1. Activate the appliance.
2. Activate an oven function or setting.
3.
Touch and hold
.
same time for 2 seconds. An acoustic
signal sounds.
Loc comes on or goes out in the dis-
play.
Useful information:
You can deactivate the appliance
when the Function Lock is on. When
you deactivate the appliance, the
Function Lock deactivates.
If the appliance has the Pyrolytic
cleaning function and the function op-
erates, the door is locked and
comes on in the display.
4.
Touch and hold
same time for 2 seconds to deacti-
vate the Function Lock
. Do
9.4 Settings menu
at the
The settings menu lets you add or remove
functions from the main menu (for exam-
ple: you can activate or deactivate the Re-
sidual heat indicator). The settings menu
has a maximum of six settings (from SET1
to SET6). Refer to the table below to see
the possible value of each setting.
Description
RESIDUAL HEAT INDI-
CATOR
and at the
and at the
and at the
Value to set
ON / OFF