Setting The Time Programs - Daikin EHSX04P30D Manuel D'utilisation

Fig. 3-8 Setting the period with the calendar function
Example: Set [Vacation] from 25th August, 2018 - 2nd Septem-
ber, 2018 [→ Main menu → Time program → Vacation]:
1 Turn the rotary button clockwise until the month selection is Aug
2018.
2 Briefly press the rotary button to confirm ("OK").
è August 1 is shown with a blue border.
Turn the rotary button clockwise until 25th August is highlighted in
blue.
1 Briefly press the rotary button to confirm ("OK").
è August 25 is shown on a grey background.
2 Turn the rotary button clockwise until 2nd September is high-
lighted in blue.
3 Briefly press the rotary button to confirm ("OK").
è The setting is saved and the setting level is exited.
When a new holiday period is set, the previously set holiday period
is automatically deleted. Alternatively, the holiday setting can also be
reset.
Example: Reset the holiday setting [→ Main menu → Time program
→ Vacation]:
1 Turn the rotary button clockwise until the month selection is dis-
played in blue.
2 Briefly press the rotary button to confirm ("OK").
è The last selected day of the holiday is displayed with a blue
border.
3 Turn the rotary button anticlockwise until all days are shown in
white.
4 Briefly press the rotary button to confirm ("OK").
è The holiday setting is reset and the setting level is exited.
3.3.7

Setting the time programs

The time program function is used to set permanent time programs
(see Chap. 4.3.2). This allows the daily setting of 3 switching cycles.
The times can be entered separately for each individual weekday or
in blocks of "Monday to Friday", "Saturday to Sunday" and "Monday
to Sunday". The selected switching cycles are highlighted in grey
(Fig. 3-9) in the overview level of the respective program.
Daikin RoCon+ HP
Daikin Controller RoCon+ HP
008.1444299_01 – 09/2018 – EN
Time period
Single day of the week (Monday,
Tuesday ...)
Working week (Monday to Fri-
day)
Weekend (Saturday to Sunday)
Entire week (Monday to Sunday) 1. 06:00 to 22:00
Tab. 3-7 Structure of the permanent time programs
INFORMATION
Time settings for a switching cycle in a weekday or block
program will also be accepted for other time periods as
long as they are for the same weekdays.
▪ The starting time in the first switching cycle is changed
from 06:00 am to 05:00 am for the individual weekday
"Monday". In the period " Monday to Friday" and "
Monday to Sunday", the first switching cycle is automat-
ically changed from 06:00 to 05:00.
Fig. 3-9 Time program function with overview level (left) and set-
ting level (right)
Example: For the [Heating circuit automatic 1] program, set switch
cycles 1 and 2 for Monday to Friday [→ Main menu → Time program
→ HC auto 1]:
1 Turn the rotary button clockwise until the Setting icon turns blue.
2 Briefly press the rotary button to confirm ("OK").
è Display changes to setting level with blue flashing period se-
lection.
3 Turn the rotary switch clockwise until the required time period is
displayed.
4 Briefly press the rotary button to confirm ("OK").
è The display changes to the input window for the start time of
the first switching cycle.
5 Briefly press the rotary button to confirm ("OK").
è Input window for start time of the first switching cycle flashes
blue.
6 Turn the rotary button clockwise until the required start time is
displayed.
7 Briefly press the rotary button to confirm ("OK").
è The display changes to the input window for the end time of
the first switching cycle.
8 Turn the rotary button clockwise until the required end time is
displayed.
9 Briefly press the rotary button to confirm ("OK").
è The display changes to the input window for the start time of
the second switching cycle.
3 Operation
Switching cycle
1. 06:00 to 22:00
2. xx:xx to xx:xx
3. xx:xx to xx:xx
1. 06:00 to 22:00
2. xx:xx to xx:xx
3. xx:xx to xx:xx
1. 06:00 to 22:00
2. xx:xx to xx:xx
3. xx:xx to xx:xx
2. xx:xx to xx:xx
3. xx:xx to xx:xx
Operating Instructions
11