Menu: 1X Hot Water; Time Program - Daikin EHSX04P30D Manuel D'utilisation

7.3.5

Menu: 1x Hot water

[→ Main menu → User → 1x load]
Parameters Setting range
Min / Max
1x Hot Water Off
On
Tab. 7-10 Parameter in menu: "1x hot water"
7.4

Time Program

[→ Main menu → Time program]
Parameters Setting range
Min / Max
Party 0 – 360 min
Away 0 – 360 min
Vacation Date 1st day
-
Date last day
Holiday Date 1st day
-
Date last day
Heating circuit See Chap. 4.3
automatic 1
Heating circuit See Chap. 4.3
automatic 2
Hot water See Chap. 4.3
automatic 1
Hot water See Chap. 4.3
automatic 2
Circulation See Chap. 4.3
program
Daikin RoCon+ HP
Daikin Controller RoCon+ HP
008.1444299_01 – 09/2018 – EN
Description
Start of one-time domestic hot water preparation to the set target value
[Hot water temp. setpoint 1] without time limit, independent of the heating
programs.
Description
This operating mode can be used to set a unique time for temporarily ex-
tending the heating time of the internal heating circuit.
This operating mode can be used to set a one-off time for temporary regu-
lation to the parametrised absence temperature.
The internal heating circuit provides continuous (24 h per day) regulation to
the parametrised absence temperature ([Room temperature reduced] para-
meter).
A calendar function can be used to enter a time period of absence.
A calendar function can be used to enter a time period of presence.
During this period of time, regulation is carried out exclusively according to
the settings for "Sunday" in the [Heating circuit auto. 1] and [Hot water
auto. 1] time programs.
In this menu, the 1st time program can be parametrised for the internal HC.
3 switching cycles with a resolution of 15 minutes can be set. A separate
entry for each weekday is possible. Format: (on) hh:mm - hh:mm (off)
Also, the cycles from Monday to Friday, Saturday to Sunday and Monday
to Sunday can be parametrised.
In this menu, the 2nd time program for the internal HC can be paramet-
rised. 3 switching cycles with a resolution of 15 minutes can be set. A sep-
arate entry for each weekday is possible. Format: (on) hh:mm - hh:mm (off)
Also, the cycles from Monday to Friday, Saturday to Sunday and Monday
to Sunday can be parametrised.
This menu can be used to parametrise the 1st time program for domestic
hot water preparation. 3 switching cycles with a resolution of 15 minutes
can be set. A separate entry for each weekday is possible. Format: (on)
hh:mm - hh:mm (off)
Also, the cycles from Monday to Friday, Saturday to Sunday and Monday
to Sunday can be parametrised.
This menu can be used to parametrise the 2nd time program for domestic
hot water preparation. 3 switching cycles with a resolution of 15 minutes
can be set. A separate entry for each weekday is possible. Format: (on)
hh:mm - hh:mm (off)
Also, the cycles from Monday to Friday, Saturday to Sunday and Monday
to Sunday can be parametrised.
This menu can be used to parametrise a timer program for the circulation
pump. 3 switching cycles with a resolution of 15 minutes can be set. A sep-
arate entry for each weekday is possible. Format: (on) hh:mm - hh:mm (off)
Also, the cycles from Monday to Friday, Saturday to Sunday and Monday
to Sunday can be parametrised.
7 Parameter settings
Factory Incre- Access
setting ment
BE HF
- E
Factory Incre- Access
setting ment
BE HF
0 min 15 min E
0 min 15 min E
- 1 day E
- 1 day E
See Tab. 15 min E
4-3
See Tab. 15 min E
4-3
See Tab. 15 min E
4-3
See Tab. 15 min E
4-3
See Tab. 15 min E
4-3
Operating Instructions
E
E
E
E
E
E
E
E
E
E
31