Scope Of Supply; Technical Data - NovoPress ACO403 BT Manuel D'utilisation

ACO403 BT
5

Scope of supply

EN
The scope of supply for the standard equipment includes:
ACO403 BT
Press device incl. Operating Manual
Press collar in separate carrying case
Battery charger incl. operating manual
18 V d.c. rechargeable battery
Safety instructions
EU Declaration of Conformity
Carrying case
U
6

Technical Data

Device:
Rated voltage:
Nominal force:
Height:
Length:
Width:
Net weight:
Max. noise level:
Noise pressure level:
Vibration value:
Type of protection:
Temperature range during operation:
Wireless technology:
Frequency range:
Maximum output power:
1)
The stated vibration emission value was measured using a standard test procedure and can be
employed for the purpose of comparison with another device.
The stated vibration emission value can also be used to obtain an initial estimate of interruptions
during intermittent operation.
Caution The vibration emission value may differ from the stated value while the device is actually in
use, depending upon the manner in which the device is used. It may be necessary to establish safety
measures to protect operating personnel, depending on the actual conditions of use (intermittent
operation.
Battery charger
For information on the function and operation of the battery charger and the rechargeable batteries,
please consult the battery charger operating instructions.
Measurement uncertainty 3 db(A)
Information!
Wear hearing protection.
Other accessories may be included as additional
extras. Please contact the system supplier for
information on the supply scope.
ACO403 BT
18 V d.c. / 5,0 Ah / M18 (Milwaukee)
120 kN
320 mm
650 mm
102 mm
12,8 kg (without battery)
89 db(A)
1)
78 db(A)
1)
<2,5 m/s²
2)
IP20
-10°C to +50°C
Bluetooth® 4.0 smart
2402,0 MHz to 2480,0 MHz
1,8 dBm
2) Measurement uncertainty 1,5 m/s²
18