Components - Panasonic TY-ST55PE9 Mode D'emploi

Components

Note
Properly dispose of the package after unpacking the product.
Base (2)
Left and right parts are identical.
Pedestal tube (2)
TY-ST55PE9
Left and right parts are identical.
TY-ST43PE9
Left and right parts are identical.
Overturn-prevention parts
Overturn-prevention belt (2)
Wood screw (2)
Specer (2)
■
The images shown in this manual are for illustrative purpose only.
■
Specifications of the product are subject to change without notice.
● Safely store small parts to keep them out of the reach of infants and young children.
● Manage screw tightening torques according to the torques specified in the assembly procedure.
● In tightening screws, use such a tool as a torque screwdriver or torque wrench. Do not use an electric screwdriver
and impact screwdriver.
Check that all the parts are accounted for and present in
their designated quantities.
Base installation screw (2)
Base installation screw (2)
Display installation screw (4)
(M4 × 28)
(M4 × 32)
(M6 × 41)
13