D Visomat ® Double Comfort Software; Important Information; System Requirements; Installing The Software - Uebe Visomat Double Comfort Mode D'emploi

D visomat
®

1. Important information

The visomat ® double comfort software is used to transfer the data measured by
the visomat double comfort upper-arm blood pressure monitor to a PC and to
®
evaluate the data.
The software is specifically matched to this blood pressure monitor and may only
be used with this monitor.
The information from the visomat double comfort software is not a substitute for
®
an individual medical consultation or examination.
To operate the software you will require a PC with a Windows
a CD-ROM drive and a USB port.

2. System requirements

Supported operating systems: Windows Vista, Windows Vista x64, Windows XP,
Windows XP x64, Windows 2000, Windows 98, Windows ME, Windows 7, Win-
dows 7 x64, Windows 8, Windows 8.1
Required hard disk memory: max. 20 MB
You will need a PDF Reader on your PC to be able to display and read out your
measurement results. A free version of Acrobat Reader is included on the software
CD.
You can also download the latest versions of the visomat
ware and of Acrobat Reader from www.visomat.de in the Service – Download
section.
EN-66
double comfort software
operating system,
®
double comfort soft-
®
visomat double comfort software
®

3. Installing the software

Insert the visomat ® double comfort software CD in your CD or DVD drive. The Au-
torun function will start the installation program automatically.
If the installation program fails to start automatically, please start it manually via
Windows Explorer by double-clicking on [Drive]:\DE\setup.exe – [Drive] here stands
for the letter of your CD/DVD drive.
This installation procedure may differ, depending on the operating system used.
D
Select the language which
you would like to guide you
through the installation pro-
cess.
If the message "File down-
load" appears, please confirm
this with "Run".
EN-67