Toilet System With Tank Monitor And Shut-Down Relay Installation; Customer Service - Dometic MASTERFLUSH MF7100 Instructions De Montage

Installation
Caution
Do not operate toilet without water supply turned on. Damage to internal components
may occur.
5.6

Toilet system with tank monitor and shut-down relay installation

Dometic MasterFlush toilets operate with Dometic DTM tank monitor systems (available separately)
to shut down electrical power to the toilet when the holding tank is full. This prevents overfi lling the
holding tank. Refer to toilet system wiring diagram on parts list.
1. Route input power wire from "full tank" relay of DTM panel to toilet's fl ush switch location.
2. Follow fl ush switch installation instructions beginning at Section 5.5, step 10.
6

Customer service

There is a strong, worldwide network to assist
in servicing and maintaining your sanitation
system. For the Authorized Service Center near
you, please call from 8:00 a.m. to 5:00 p.m.
(ET) Monday through Friday.
Telephone:
Fax:
Web site:
© 2014 Dometic Corporation
All rights reserved
600347006 11/13
You may also contact or have your local
dealer contact the Parts Distributor nearest
you for quick response to your replacement
parts needs. They carry a complete inventory
for the Dometic sanitation product line.
1 800-321-9886
330-439-5550
330-496-3097
330-439-5567
http://www.Dometic.com
Dometic MasterFlush
U.S.A. and Canada
International
U.S.A. and Canada
International
BIG PRAIRIE, OHIO 44611 USA
DOMETIC CORPORATION
SANITATION DIVISION
13128 SR 226 | PO BOX 38
www.Dometic.com
13