Intended Use; Specifications; Toilet Dimensions - Dometic Gravity-Flush 310 Mode D'emploi

Intended use / Specifications
3

Intended use

Dometic model 310 toilet provides a lightweight, residential-size toilet for installation directly above a
holding tank .
3.1 Benefits
PowerFlush technology. Improved pressurized rim flow creates high-speed vortex of water for full
bowl rinsing .
Premium user comfort. Full-size seat, deep bowl and 18-in . (457 mm) seat height result in greater
homelike performance .
Easy installation. Two-bolt design fits most existing toilet floor flanges – great for new or replace-
ment installations . Just place on floor flange, tighten bolts, connect water, and it's ready .
Compact design. Small footprint and 10-inch (254 mm) rough-in fits in most any restroom .
Ergonomically enhanced pedal operation. Lower pedal height for easier use; "one-direction" action
to add water and flush .
4

Specifications

4.1 Materials
Toilet bowl: vitreous ceramic
Toilet seat: polypropylene
Flush ball seal: nitrile butyl rubber
Toilet base: polypropylene
4.2 Minimum installation requirements
Water
Flow rate
Supply
Static pressure
Discharge Floor flange
* Water supply that exceeds 5 .0 gpm / 18 .9 lpm may require a flow restrictor at toilet inlet .
Specifications subject to change without notice .
4.3

Toilet Dimensions

Ref. Dimension
A 20 in . / 508 mm
B 15 in . / 381 mm
C 19 in . / 483 mm
D 18 in . / 457 mm - seat height
E 14 .75 in . / 375 mm
F 33 in . / 838 mm - seat lid up
Fitting
3 .0-5 .0* gpm / 11 .4-18 .9 lpm recommended
3 in ./76 mm ID, 1/4-7/16 in . (6-11 mm) thick
(fig . 2 , page 2)
Foot pedal: polypropylene
Water valve: polypropylene
Vacuum breaker: ABS/polypropylene
Floor seal: nitrile rubber, foam
0 .5 in . NPT
2 .0 gpm / 9 .5 lpm minimum
30-100 PSI / 206 .8-689 .5 kPa
Dometic Model 310 Toilet
5